CRS CREOFLEX 1350
Attention: No fastening set included, select a fastening set under goods group 103.034
item number: 103.031.002
Description: Single-row CREOFLEX mounting system 1,350 mm/10-30°
Efficient insertion system for tilt-mounted PV systems on flat and pitched roofs and
module lengths up to 1,350 mm, consists of:
aluminum frame, AluTec rails, cross bracings,
with aluminum or stainless steel connection and fastening components
Tilt angle 10-30°, can be selected upon ordering,
frame spacing approx. 1,600 mm
Price is subject to an inspection and approval of the static load characteristics
of the building
Roof fastening must be ordered separately
CRS CREOFLEX 1680
Single-row CREOFLEX mounting system 1,680 mm/10-30°
item number: 103.031.003
Description: Single-row CREOFLEX mounting system 1,680 mm/10-30°
Efficient insertion system for tilt-mounted
PV systems on flat and pitched roofs and
module lengths up to 1,680 mm, consists of:
aluminum frame, AluTec rails, cross bracings,
with aluminum or stainless steel connection and fastening components
Tilt angle 10-30°, can be selected upon ordering, frame spacing approx. 1,600 mm
Price is subject to an inspection and approval of the static load characteristics of the
building; Roof fastening must be ordered separately
CRS CREOFLEX FS3
3-row CREOFLEX mounting system First Solar/10-20°
item number: 103.031.004
Description: 3-row CREOFLEX mounting system First Solar/10-20°
Efficient insertion system for tilt-mounted PV systems on flat roofs and 3 rows of
First Solar modules mounted horizontally and one above the other, consists of:
aluminum frame with suitable holes, AluTec FL rails,
cross bracings, complete with aluminum, stainless steel and EPDM rubber connection
and fastening components
Tilt angle 12-20°, can be selected upon ordering, frame spacing approx. 1,850 mm
Price is subject to an inspection and approval of the static load characteristics of the
building; Roof fastening must be ordered separately
CRS CREOFLEX 42 FL
Single-row CREOFLEX mounting system 1300 mm/10–30°
item number: 103.031.005
Description: Efficient insertion system for tilt-mounted PV systems on flat roofs for
unframed double glass laminates with 7–8 mm with 28 mm high steel backrails
adhered to the rear side/single-row modules mounted horizontally
Consists of:
Aluminum frame with suitable holes, AluTec 42 FL rails,
cross bracings, complete with aluminum, stainless steel and EPDM rubber connection
and fastening components, tilt angle 10–30° can be selected upon ordering,
frame spacing approx. 1,500 mm, price is subject to an inspection
and approval of the static load characteristics of the building, roof fastening must be ordered separately
Snow load on base 0.85 kN/m²
(zone 2 to 285 m acc. to DIN 1055-5),
Dynamic wind pressure 0.50 kN/m²
(zone 1 to 10 m acc. to DIN 1055-4).
Deutschland
France
England
España
Italia
Schweiz
USA
